Tile Adhesives, Tile Grouts & Tile Cleaners

4A. ALGITILEAIDFLEX

ULTRA HIGH STRENGTH TILE FIXING ADHESIVE

Properties: ALGITILEAID FLEX is a cementatious highly polymer modified tile fixing adhesive for extra high adhesion in fixing of vitrified tiles, granite and marble. It is suitable for tile on tile and for tiling on floors and walls for interior and exterior application. It is a ready mix of cement and special chemicals and is self curing and water proof.

Application Areas: 3 parts of ALGITILEAID FLEX by volume has to be mixed with 1 part by volume of water. After initial mixing with water, wait for 5 minutes and then re-mix ALGITILEAID FLEX.

Coverage: ALGITILEAID FLEX gives coverage of 3.0 to 4.0 Ft²/kg.

4B. ALGITILE AID

TILE FIXING ADHESIVE.

Properties: Suitable for fixing tile over tile and for fixing tiles on exterior of the building. ALGITILE AID has high adhesion and also works as an additional water proofing barrier.

Application Areas: For fixing ceramic, marble, mosaic tiles on floors & walls. Coverage: 4-4.5 Sq.ft./Kg.

Application Method: Mix ALGITILE AID with water in 5:2 ratio by volume and spread over cleaned concrete surface using notch trowel (supplied along with the product). Immediately fix tiles over it. Caution: Do not apply ALGITILE AID on painted/oily surface.

4C. ALGITILE AID GP/GP1

TILE FIXING ADHESIVE FOR INTERNAL APPLICATION.

Properties: It is suitable for fixing tiles on interior wall and floor areas. Economical, saves labour time and hence cost. It has very high adhesion, and works as an additional waterproofing layer.

Application Areas: For fixing ceramic, marble, mosaic tiles on floors & walls. Suitable for interior application. Coverage: 4-4.5 sq. ft / kg.

Application Method: Mix ALGITILE AID GP with water in 5:2 ratio by volume and spread over the cleaned concrete surface and on back of tile by using a notch trowel (supplied along with the product) and immediately fix tiles over it. Caution: Do not apply ALGITILE AID GP on painted/oily surface.

4D. ALGITILE AID SP

SUPERIOR GRADE TILE ADHESIVE FOR FIXING TILES

Properties: Suitable for fixing tiles on floors and walls for interior as well as exterior of the building. Coverage : 4--5 sqft / kg.

Application Method: Mix ALGITILE AID SP with water in 5:2 ratio by volume. Apply ALGITILE AID SP using notch trowel on the floor / wall. Also apply some quantity of ALGITILE AID SP on the back of the tile. Apply only small quantity of ALGITILE AID SP on the wall on which tiles can be placed within 3 to 5 minutes.

4E. ALGITILE AID-I/I2

ECONOMICAL TILE ADHESIVE FOR FIXING TILES

Properties: Suitable for fixing tiles on floors & walls for interior of the building. ALGITILE AID I has high adhesion and also provides additional waterproofing barrier. It is highly economical, saves labour time & cost.

Application Areas: For fixing ceramic, marble, mosaic tiles on floors & walls. Coverage: 4--4.5 Sq. ft./Kg. Application Method: Mix ALGITILE AID-I with water in 5:2 ratio by volume and spread over cleaned concrete surface with notch trowel (supplied along with the product). Immediately fix tiles over it. Caution: Do not apply ALGITILE AID-I on painted/oily surface

4F. ALGITITE

TWO COMPONENT ULTRA HIGH ADHESION EPOXY ADHESIVE

Properties: Thixotropic and hence suitable for vertical application. Sets quickly in 2 hours and hence reduces labour time. Very high adhesion and can bond different materials. It can be filed to remove additional left over material.

Application Areas: For fixing granite, plastic, metal, wood etc. Sets in 2 hours

Application Method: Mix ALGITITE resin and hardener in the ratio of 1:1 by volume. Keep it for 5 minutes and then apply on clean and dry surface that needs to be bonded.

Coverage: 25-30 Sq. ft./kg,

4G. ALGITILE JOINT GROUT

TILE JOINT GROUT FOR INTERIOR OF THE BUILDING

Properties: Eliminates cumbersome process and time needed in matching the colours and wastage of pigments at site. Accurate colour matching is possible. Colours indicated are colours obtained after full cure of grouts and hence error of matching colour to that of grout immediately on addition of water is eliminated. Alkali stable and pure and high quality pigments are used. This reduces fading and batch to batch variation of colours.

Application Areas: Grouting ceramic, marble, mosaic tile joints.

Application Method: Mix ALGI TILEJOINT GROUT with water in 2:1 ratio by volume & apply in tile joints.

Coverage: 4-4.5m²/kg for tiles of size 150mm x 150mm.

4H. ALGITILE GROUT GP

ECONOMICAL TILE GROUT FOR TILE JOINT FILLING.

Properties: Economical tile joint grout. Suitable for tile joints in interior of the building and in dry areas where water proofing is not a requirement.

Application Method: Mix ALGITILE GROUT GP with water in the ratio of 2:1 by volume and apply in tile joints.

4I. ALGI TILE GROUT SPR

CEMENTIOUS WATER REPELLENT TILE JOINT GROUT

Properties: ALGITILE JOINT GROUT SPR has good water repellent property with very high gloss & stain resistance. Its water absorption is 1-1.5% (with 7 days water curing.) Compressive strength is greater than 250 kg/cm2.

4J. ALGI TILE GROUT - E

SANDED TILE GROUT FOR FILLING EXTERIOR TILE JOINTS.

Properties: It is suitable for exterior wide joint grout. It has 24 Hrs. water absorption of 0.5-1.5% by weight (with 7 days curing). 2 Compressive strength is more greater than 200kg / cm .

4K. ALGILIQUIDGROUT

POURABLE TILE GROUT FOR FILLING ULTRA THIN TILE JOINTS

Properties: ALGILIQUIDGROUT is a ready mix of cement and special chemicals, self curing and waterproof. It can be used for paper thin joints in case of Vitrified tiles, Swimming pool tile joints, Marble, Granite and bathroom tilings.

Coverage: 4 to 4.5m²/kg for tiles of size 150mm X 150 mm.

4L. ALGITILE GROUT EPX

EPOXY BASED STAIN & GERM FREE TILE JOINT GROUT.

Properties: It is an acid, alkali, stain and germ growth resistant and waterproof joint grout. Water absorption of Joint grout is less than 0.1%. Compressive strength achieved in 2 days is 800kg/cm2. The grout has good gloss and very high visual appeal.

Application Areas: For grouting ceramic, vitrified, marble and granite tile joints.

Application methods: Tile joints should be dry. First mix resin & hardener to uniform consistency. Then add filler & mix well. Fill in the joints using putty blade. Polish the joint with scrubber to make it smooth. Suitable for light traffic after 2 days. Full cure : 7 days. Do not use for exterior tile joints.

Coverage: 40 sqft / Kg for 15 cm x 15 cm tiles.

4M. ALGITILECOLOREX

Properties: Additive added at the rate of 350 ml per kg of interior tile joint grout to give deep colour to grout. It prevents fading of the grout due to impurities in water. It also improves impermeability, finishing, compressive strength. It is highly economical compared to epoxy grout.

4N. ALGITILECOLOREX SP

Properties: Additive added at the rate of 350ml per Kg of tile grout for both interior as well as exterior tile grout to get deep colour shade. It is basically recommended for bath room joints and exterior jointgrouts and where water proofing is of critical importance.